Adjusting the speed of an ES200 automatic door operator involves accessing its control settings typically found on the unit itself or through a remote control device. Here are the general steps:

  1. Locate the Control Panel: Find the control panel on the ES200 automatic door operator. This is usually near the top or side of the unit.

2. Access Settings: Depending on the model, you might need to open a cover or use a specific tool to access the settings. Refer to the manufacturer’s manual for detailed instructions.

3. Adjust Opening Speed: Look for settings labeled “Opening Speed” or similar. This allows you to control how quickly the door opens after activation. Adjust this setting to suit your requirements.

4. Adjust Closing Speed: Similarly, locate the “Closing Speed” setting. This controls the speed at which the door closes after it begins to move. Adjust as needed for safety and convenience.

5. Other Settings: Some operators may also allow adjustments for delay times, hold-open times, or sensitivity to obstacles.

6. Test and Fine-tune: After making adjustments, test the door to ensure it operates smoothly and meets your expectations for speed and performance.

Leave a Comment